Wand 2
Power is Pleasure
Our classic massager in its ultimate form – a cordless and waterproof vibrator so powerful it’ll deliver the climax of your dreams. Connect with the free We-Vibe App to make partner play even more fun.

Chorus overview

Adjustable fit

Squeeze remote

Cleaning

Power on

Vibration pattern modes

How to use

Pairing

App connection

Long distance play

Touch sense

Touch sense modes

Charging

Battery change remote

Safety instructions

Table of contents
1
Overview
1
On/Increase
Press the + button to power on. Press again to increase the intensity.
2
Off/Decrease
Switch back to a lower intensity level by pressing the - button. Hold to turn off.
3
Next
Press the > to switch to the next vibration pattern.
4
Previous
Switch back to your previous pattern by pressing the < button.
5
Smart Silence on/off
Smart Silence on/off press briefly.
6
Magnetic charging pins
7
Stimulation head
Ergonomic shape for your preferred stimulation.
2
Cleaning
Rinse Wand 2 with warm water and dry with a lint-free cloth. We recommend using a premium toy cleaner for best results.
3
Enjoy
When Smart Silence is activated, Wand 2 responds to touch, only vibrating when the head is in contact with skin. To turn Smart Silence on or off, press the We-Vibe button.
We recommend applying water-based lube to both Wand 2 and your body.
Easy to hold and adjust, curving gently for the perfect angle and control,
with a flexible head that moves with you.
4
Charging
Enjoy up to 2 hours of play with every charge. When it’s time for a recharge, place charger on magnetic pins. After 120 minutes, your toy is ready to go!
5
Same room play
To pair Wand 2 to We-Vibe App, follow the in-app pairing instructions on your app-enabled device. Press and hold the We-Vibe button for 5 seconds. Wand 2 vibrates twice and the LED will start flashing. Wand is in pairing mode now. Once paired, Wand 2 will vibrate three times and the LED will stop flashing.
6
Long distance play
To play long distance, both you and your partner need the We-Vibe App on your app-enabled devices. Wand 2 is then paired to the device that remains within Bluetooth range.
7
Travel lock
For safe and discreet travel, activate the travel lock feature by holding the + and - buttons at the same time for 2 seconds. Wand 2 will pulse twice and your device will lock – do the same again to unlock or connect Wand 2 to the charging cable.
8
Safety instructions

WARNING

Sold as a novelty product only. Not suitable for medical purposes. Only use the  product for the intended purpose. Keep out of reach of children. If you are under a physician’s care and/or have a condition requiring the use of any  medical device, please consult your physician before using this product. Stop using the product immediately if you experience any skin irritations, pain or discomfort and consult your physician. This  product can be used by adults only. Persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge may  only use the product if they have been given supervision or  instruction concerning use of the product in a safe way and understand  the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children. Do not use on swollen or inflamed areas of skin. Remove  piercings or jewelers in the genital area before use. Always clean the product before and after use according to the instructions given in the manual. To avoid damage to the product, the product and its battery must not be exposed to temperatures above 45°C, be dismantled or mechanically or electrically damaged. Sharing sex toys may transmit sexual diseases. Do not share your sex toys with users other than your partner. Use protective measures with your partner if  necessary. Do not use the toy if you detect any cracks or signs of  degradation in the cover material. This  product is not designed for anal use. Do not use anally! Check the charging device and the product regularly for damage and do not use in  any case of damage. Magnetic fields can influence mechanical and electronic components such as pacemakers.  Do not use the product directly over a pacemaker. Contact your physician for  more information. Keep cards with magnetic stripes (such as credit cards) away from the product, as they may be damaged by the product’s magnet. If your product appears to be functioning abnormally, turn it off and consult  the support section on our website.

CHARGING

Before  the first use of the charging device, check the local voltage level, since  the local mains voltage may not exceed the maximum mains voltage given on the  charging device. The  product must only be charged at an appropriate, extra-low  voltage corresponding to the marking on the product: Do not  use or clean the product while the battery is charging. Never  immerse the charging device or charging cable in water or other fluids. This  product contains batteries that are non-replaceable. This  product contains a rechargeable Li-ion battery. Disconnect  the charging cable from the electrical supply each time after the product has  been charged.

FOR OPTIMAL USE OF THE PRODUCT, PLEASE FOLLOW THE FOLLOWING GUIDELINES:

To guarantee a long battery life, please charge the product regularly, even if not in use. Store in a secure, dry place without exposure to direct sunlight. We recommend using a water-based lubricant with your product. To prevent damage to the product, do not use perfumed, alcohol-based lubricants, gels or massage oils with the product. Do not use silicone-based lubricants with silicone products.

NOTE ON BATTERIES:

European regulations require that we provide the following information: Batteries and rechargeable batteries must not be disposed of in household waste. As an end user, you are legally required to return used batteries. Please use official collection facilities such as the collection points provided by public waste management authorities to do so. You can also return used batteries that we carry or have carried as new batteries to us. Please contact us at care@we-vibe.com. To prevent short circuits, the poles of lithium batteries should be taped before returning. For safety reasons, we ask you not to send the batteries to us by mail and refer you to the regulations for sending hazardous goods provided by mail carriers.

If the batteries are permanently installed in the product, please do not try to remove them yourself. This may cause permanent damage to the device. Your obligations as a customer are otherwise regulated by the WEEE Directive and the national implementation law. Please observe the information in the manual and the safety instructions to prevent waste and littering. Used batteries contain harmful substances that can damage the environment or your health if they are not stored or disposed of properly. In particular, this applies to the improper handling of lithium batteries. Batteries also contain important raw materials such as iron, zinc, manganese and nickel and can be recycled. Separate collection allows these raw materials to be recycled and prevents negative impacts on the environment and human health from released pollutants. The sign with the crossed-out waste bin means that you must not dispose of batteries and accumulators with household waste.

If the legal requirements are present, this sign means that the following symbols and their meaning must be used when labeling the batteries:

Hg: Battery contains more than 0.0005 percent mercury by mass

Pb: Battery contains more than 0.004 percent lead by mass

Cd: Battery contains more than 0.002 percent cadmium by mass

NOTES ON THE DISPOSAL OF 
ELECTRICAL EQUIPMENT

European regulations require that we provide the following information: We would like to point out to owners of electrical equipment that old electrical equipment must be collected separately from municipal waste in accordance with applicable legal regulations. Batteries and accumulators that are not firmly encased in the old electrical equipment, as well as bulbs that can be removed from the equipment without being destroyed, must be separated from the old equipment in a non-destructive way before being given to a collection point for proper disposal. Please refer to the separate instructions for the disposal of batteries. The symbol of a crossed-out waste bin shown below and affixed to old electrical equipment also indicates that the equipment must be collected separately:

According to the WEEE Directive and the national implementation law, as distributors of electrical equipment, we are required to take back certain waste electrical equipment free of charge. When you purchase a new electrical and electronic device, you can surrender an old electrical device that essentially performs the same functions as the new device to us free of charge. If your old electrical equipment is not larger than 25 centimeters in any dimension, you can also surrender it to us free of charge without purchasing a new device. Please contact us at care@we-vibe.com. We will then arrange the return of the old electrical equipment. For safety reasons, we would like to ask you to refrain from shipping lighting equipment (such as bulbs). Please use the collection points provided by public waste management authorities to return lighting equipment or contact us directly at the aforementioned e-mail address.  You can also return old electrical equipment to any of the collection points run by the public waste disposal authorities. You are making an important contribution to the reuse, recycling and other recovery of old appliances by sending your old electrical equipment for separate collection in the proper collection groups. As the end user, you are responsible for deleting personal data from the used electrical equipment before handing it in for disposal. Please observe the information in the manual and safety instructions to prevent waste, and please check for possible repair options.

Contains

FCC ID: ZUEWND20B     
IC: 9804a-WND20B
Model: WND20B
HVIN: WND20B
PMN: WAND 2


Responsible party - U.S. Contact Information:

WOW Tech USA Ltd.
103 Foulk Rd, Ste. 202
Wilmington, DE, USA
19803-3742

Attention: President

FCC and IC statements:

This device complies with Part 15 of the FCC Rules and Industry Canada license exempt RSSOperation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil est conforme à la partie 15 des Règles FCC et aux normes RSS exemptes de licence d’Industry Canada. L’utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles qui pourraient provoquer un fonctionnement non souhaité.Cet appareil numérique de classe B est conforme à la norme canadienne NMB-003.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

The device must not be co-located or operating in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance.

Le présent appareil est conforme de ce matériel aux conformités  ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité d’acquérir les informations  correspondante.

WOW Tech Europe GmbH declares that the radio equipment type [Non-Specific Short Range Device] is compliant with Directive 2014/53/EU. WOW Tech Europe GmbH declares that the product is also compliant with Directive 2011/65/EC (RoHS). The full text of the EU declaration of conformity is available at the following internet address: we-vibe.com/legal.

ELECTRICAL RATING
Model:  Wand 2
Model No.: WND20B
Electrical  Rating:    
7.4V ⎓ 0.6A : Built-in li-ion rechargeable battery.    
5V ⎓ 1.0A : When charged using USB Charging device.    

Use USB AC adapter (not included) with power output corresponding to product rating.    
Use original provided cable only.
Operation Frequency (MHz): 2402 - 2480
Max. RF output power (dBM): Device: <0.81
FCC SDoC (We-Vibe Wand 2, WND20B):

Designed in Canada.

WOW Tech Europe GmbH
Hermann-Blankenstein-Str. 510249 Berlin, Germany

CUSTOMER CARE
care@we-vibe.com
www.we-vibe.com

Packaging
Manuals
Product

Date of issue: 11/2023
MA-00249_rev-B

Back to top arrow.